fbpx
Decalk Decalcificante macchina caffè

DECALK 3 – Descaler for coffee machine

DECALK 3 is a liquid professional formula designed to easily remove limescale deposits that build up inside coffee machine, that can cause malfunctioning. The periodic use extends the life of the machine, keeping the appliance in full efficiency, preventing breakdowns caused by limescale deposits.

DECALK 3 is based on lactic acid, a substance known for its decontaminating and decalcifying properties. The periodic use of DECALK 3 allows the complete removal of dirt and limestone residues that accumulate in the boiler and in the coffee machine system, keeping the machine full working, preventing failures, extending its life and saving energy.

It is suitable for all types of coffee machine, espresso or “American” coffee, manual and automatic, pods and capsules.
It is suitable also for kettles.
It does not damage plastic or metal parts. It is fast and effective, for professional cleaning of the appliance.

DECALK 3 is safe for health and the environment as it is 100% of natural origin and completely biodegradable.

The content allows up to 2 descaling.

Periodic treatment with Decalk 3 is recommended every 4/6 months, based on the frequency of use of the appliance and the water hardness.

Coffee machine:

Pour DECALK 3 into the tank, according to the recommended dosage.
Add tap water until  the max Level.
Start the machine for a few seconds.
Leave to act for 10 minutes and start the machine until the descaling solution is ended.
Make the rinse cycle with fresh water for at least twice.

Refer to the user manual in case of appliances with automatic descaling cycles.

RECOMMENDED DOSE:

  • 1 or 2 coffees a day: 75 ml (half a bottle)
  • More than 3 coffees a day: 150 ml (the whole bottle)

Kettle:

Pour DECALK 3 into the kettle, according to the recommended dosage.
Add tap water until the max Level.
Leave the product act for about 10 minutes.
Rinse with fresh water eliminating any residual of the product.

RECOMMENDED DOSE:

  • small limestone quantity: 75 ml (half a bottle)
  • High limestone quantity: 150 ml (the whole bottle)

Repeat the descaling operation as needed, based on the frequency of use and the water hardness.

INSTRUCTIONS FOR DISPOSAL OF THE PACKAGING:

BOTTLE> HDPE 2> PLASTIC COLLECTION

CAP> PP5> PLASTIC COLLECTION

LABEL> PP5> PLASTIC COLLECTION

Check the rules of your local authority.
Squeeze the bottle on one side. Do not separate the cap. Do not separate the label.